EntraPass MorphoAccess SIGMA Lite Series, Руководство по установке

Страница: 41 / 74

Data Clock Output
The following figure shows how to cable the wires of the Wiegand OUT port of the
terminal for Data Clock protocol. This is used, for instance, to connect the
MorphoAccess® SIGMA Lite terminal to an Access Control Panel (ACP).
Figure 17: Wiegand port wiring – Data Clock
14 Green WIEGAND _OUT0 Out Data ( 5V TTL )
16 White WIEGAND _OUT1 Out Clock ( 5V TTL )
17 Blue WIEGAND_LEDOUT1 In
Card present signal (if
configured, only one selectable
for Morpho Legacy)
18 Blue / Red WIEGAND_LEDOUT2 In
Card present signal (if
configured)
20 Black / Red WIEGAND_GND Ground for Wiegand
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099