Ethernet Adapter Manager Installation 4-1
Chapter 4
Ethernet Adapter Manager Installation
This chapter describes how to install and configure the Ethernet Adapter Manager.
The RoamAbout Ethernet Adapter Manager is used to configure the Ethernet Adapter. You
can install it on a PC or workstation running Windows 95/98/NT/2000 or Millennium. The
Ethernet Adapter Manager allows you to graphically and remotely:
•
Display a list of Ethernet Adapter stations running on the local network
•
Display and edit the current Ethernet Adapter configuration
•
Save and load configurations
•
Update the Ethernet Adapter firmware
Installation
To install the Ethernet Adapter Manager, perform the following steps:
1)
Insert the Ethernet Adapter Manager CD-ROM into the CD-ROM drive.
If the installation program does not begin automatically, preform the
following steps:
a)
Click on the My Computer icon on your desktop.
b)
Click on the icon for the CD-ROM.
c)
Double-click on the setup.exe icon.
The Welcome window appears.
2)
Click NEXT to continue the installation, or CANCEL to terminate.
The Software License agreement appears.
The Ethernet Adapter Manager communicates with the Ethernet Adapter
using a non-routing protocol. Your Ethernet Adapter units must be
accessible on the local Ethernet network to communicate with the Ethernet
Adapter Manager.
NOTE
