Enterasys Vertical Horizon VH-2402S2, Руководство по настройке

Страница: 74 / 116

66 VH-2402S2 User Interface VH-2402S2
Displaying the Unicast Address Table
The Address Table contains the MAC addresses and VLAN identifier
associated with each port (that is, the source port associated with the
address and VLAN), sorted by MAC address or VLAN ID. You can search
for a specific address, clear the entire address table, or information
associated with a specific address, or set the aging time for deleting
inactive entries.
Figure 2-51. Unicast Address Table
Vertical Horizon Stack Local Management
Unicast Address Table
Aging Time : 300 Dynamic Counts : 0 Static Counts : 0
MAC VID Unit Port Status MAC VID Unit Port Status
------------------------------------------------------------------------------
Sorted by : MAC + VID Cleared by : MAC + VID
VLAN ID : 1 VLAN ID : 1
MAC : 00-00-00-00-00-00 MAC : 2D-2D-2D-2D-2D-2D
[Show] [More] [Clear] [Clear Dynamic]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Aging Time Time-out period in seconds for aging out dynamically learned
forwarding information.
Range: 10 -
415
seconds; Default: 300 seconds
Dynamic Counts The number of dynamically learned addresses in the table.
Static Counts The number of static addresses in the table.
MAC The MAC address of a node.
VID The VLAN(s) associated with this address or port.
Unit Switch unit in the stack (1~7).
Port The port whose address table includes this MAC address.
Status Indicates address status as:
D: Dynamically learned, or
P: Fixed permanently by SNMP network management software.
[Show] Displays the address table based on specified VLAN ID, and
sorted by primary key MAC or VID.
[More] Scrolls through the entries in the address table.
[Clear] Clears the specified MAC address.
[Clear Dynamic] Clears all dynamically learned MAC addresses in the table.