Enterasys Vertical Horizon VH-2402S2, Руководство по настройке

Страница: 18 / 116

10 VH-2402S2 User Interface VH-2402S2
Management
Configuration Specifies if management access to the switch is available
from all VLANs or restricted to one VLAN.
Device Control Menu
Port Configuration Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
Port Information Displays operational status, including link state, flow control
method, and duplex mode.
Port Security
Configuration Allows you to enable and configure port security for the
switch.
Port Trunking
Configuration Specifies ports to group into aggregate trunks.
Extented Bridge
Configuration Displays/configures extended bridge capabilities provided by
this switch, including support for traffic classes, GMRP
multicast filtering, and VLAN extensions.
Spanning Tree
Configuration Enables Spanning Tree Algorithm; also sets parameters for
hello time, maximum message age, switch priority, and
forward delay; as well as port priority and path cost.
Spanning Tree
Information Displays full listing of parameters for the Spanning Tree
Algorithm.
Mirror Port
Configuration Sets the source and target ports for mirroring.
BStorm Control
Configuration Allows you to enable broadcast storm control and set the
packet-per-second threshold.
Global VLAN
Configuration Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported, and allows you to
enable/disable each VLAN.
Port Assignment
VLAN Configuration Displays/configures port-specific VLAN settings, including
PVID, ingress filtering, and 802.1Q trunks.
Egress Ports VLAN
Configuration Configures VLAN groups via static assignments to individual
ports or a range of ports, including setting ports as members
and configuring them as untagged.
VLAN Forbidden Ports
Configuration Restricts individual ports or a range of ports from being
dynamically added to a VLAN by the GVRP protocol.
802.1Q VLAN
Base Information Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported.
802.1Q VLAN Current
Table Information Displays VLAN groups and port members.
802.1Q VLAN Static
Table Configuration Configures VLAN groups via static assignments, including
setting port members, or restricting ports from being
dynamically added to a VLAN by the GVRP protocol.
802.1P Configuration Configures default port priorities and queue assignments.
IGMP Configuration Configures IGMP multicast filtering.
IGMP Member Port
Configuration Assigns ports that are attached to hosts who want to receive
a specific multicast service.
Multicast Router Port
Configuration Displays the ports on the switch attached to a neighboring
multicast router/switch for each VLAN ID.
Selection Description