Enterasys Vertical Horizon VH-2402S2, Руководство по настройке

Страница: 36 / 116

28 VH-2402S2 User Interface VH-2402S2
Configuring Management Access
Use the Management Configuration menu to define which VLAN has
management access to the switch. Parameters shown on this screen are
indicated in the following figure and table.
Figure 2-19. Management Configuration
Vertical Horizon Stack Local Management
Management Configuration
Management VLAN : ALL
VLAN : 1
ARP reply timer : 1
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter Default Description
Management VLAN All Select ALL to give all VLANs access to switch
management, or ONE to restrict access to a
specified VLAN. If you select just one VLAN, you
must specify its VLAN ID on the following line.
VLAN 1 Specifies the VLAN ID that has access to switch
management.
ARP reply timer 1 Sets the interval time (in seconds) for sending ARP
(Address Resolution Protocol) replies to other
devices in the network. ARP is a protocol that allows
network devices to identify the MAC address of a
device that corresponds to a given IP address.