Enterasys Vertical Horizon VH-2402S2, Руководство по настройке

Страница: 48 / 116

40 VH-2402S2 User Interface VH-2402S2
Configuring STA for Ports or Modules
The following figure and table describe STA configuration for ports or
modules. (Note that the Spanning Tree Configuration screen for the
expansion slots also indicates module type.)
Figure 2-28. Spanning Tree Port Configuration
Vertical Horizon Stack Local Management
Spanning Tree Port Configuration : Unit 1 Port 1-12
Fast forwarding on all ports : [Enable] [Disable]
Port Type Priority Cost FastForwarding
-------------------------------------------------------
1 10/100TX 128 19 DISABLED
2 10/100TX 128 19 DISABLED
3 10/100TX 128 19 DISABLED
4 10/100TX 128 19 DISABLED
5 10/100TX 128 19 DISABLED
6 10/100TX 128 19 DISABLED
7 10/100TX 128 19 DISABLED
8 10/100TX 128 19 DISABLED
9 10/100TX 128 19 DISABLED
10 10/100TX 128 19 DISABLED
11 10/100TX 128 19 DISABLED
12 10/100TX 128 19 DISABLED
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter Default Description
Fast forwarding mode
of all ports ENABLED Allows you to enable or disable fast forwarding for
all ports on the switch.
Type Shows 10/100TX, 100FX, 1000LX, 1000SX,
1000T, or GBIC port.
Priority 128 Defines the priority for the use of a port in the STA
algorithm. If the path cost for all ports on a switch
are the same, the port with the highest priority (i.e.,
lowest value) will be configured as an active link in
the spanning tree. Where more than one port is
assigned the highest priority, the port with lowest
numeric identifier will be enabled.
The range is 0 - 255.
(Path) Cost 100/19/4 This parameter is used by the STA algorithm to
determine the best path between devices.
Therefore, lower values should be assigned to
ports attached to faster media, and higher values
assigned to ports with slower media.
(Path cost takes precedence over port priority.)
The default and recommended range is:
Ethernet: 100 (50~600)
Fast Ethernet: 19 (10~60)
Gigabit Ethernet: 4 (3~10)
The full range is 1 - 65535.