Structure of This Guide
xiv
About This Guide
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
Chapter 1,
Introduction
, provides an overview of the modules and their features.
Chapter 2,
Network Requirements
, outlines the network requirements that must be met before
installing the module.
Chapter 3,
Installation
, provides instructions on how to install the module and connect segments
to the module.
Chapter 4,
Troubleshooting
, describes the function of the LANVIEW LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A,
Specifications
, contains information on functionality and operating specifications,
connector pinouts, environmental requirements, and physical properties.
Appendix B,
Mode Switch Bank Settings and Options
, describes how to set the Mode Switch,
and install the optional FLASH module upgrade.
Appendix C,
GPIM Specifications
, lists the operating specifications and regulatory compliance
for the GPIMs.
RELATED DOCUMENTS
The following Enterasys Networks
documents may help to set up and manage the module:
•
Matrix E7 Series and SmartSwitch 6000 Series Modules Local Management User’s Guide
•
Matrix E7 Overview and Setup Guide
•
6C105 SmartSwitch 6000
Overview and Setup Guide
•
Ethernet Technology Guide
•
Cabling Guide
•
SmartTrunk User’s Guide
The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
http://www.enterasys.com/support/manuals/
NOTE:
All documentation for the SecureFast VLAN Manager software is contained on
the VLAN Manager CD-ROM.
