Enterasys SBUQHS/QHB Скачать руководство пользователя

Страница: 2 / 96

Quad User Modules

User Manual

80-14001000-03

Publication — 80-14001000-03

Publication Notice:

This manual has been compiled and checked for accuracy. However the

information contained in this manual does not constitute a warranty of

performance. Cabletron Systems Ltd. reserves the right to revise this

publication from time to time without notice. Cabletron Systems Ltd.

assumes no liability for losses incurred as a result of out of date or incorrect

information contained in this manual.

Proprietary Notice:

This document may not in whole or part be copied, photocopied, reproduced,

translated, or reduced to any electronic medium or machine-readable form

without prior consent from Cabletron Systems Ltd.

Approval Notice:

This equipment is approved for connection to all United Kingdom

telecommunications services, including British Telecom PLC, Hull City

Council and Mercury Communications, and is subject to the conditions set

out in these instructions for use.

Refer to the SBU Systems User Manual for safety compliance and

precautions.

Pan European Approval:

Where the Pan European Approval CE Mark ‘168X’ is applied to the product;

this approval is for connection of the ISDN, X.21, V.35 and V.24 interfaces

within the European Community (EC).

Only compatible Approved terminal apparatus may be connected to the User

ports, due to the hardwire connection to the Link ports when the unit is

powered off.

Approval in non EC countries is subject to local regulations in force, please

contact your Technical Support for information.

EMC Directive:

This product has been designed for use in Commercial and Light Industrial

environments and tested to relevant EMC Standards as listed in the

European O.J. All testing was carried out using screened interconnection

cables. Should the equipment be used in a different environment the user

may need to take additional EMC precautions.

Fivemere Ltd. is a subsidiary of Cabletron Systems Inc., USA.

Содержание SBUQHS/QHB

































































































Результаты поиска

Содержание SBUQHS/QHB

Отзывы:

Похожие инструкции для SBUQHS/QHB

Бренды по названию

Популярные бренды

Enterasys SBUQHS/QHB, Руководство пользователя

Результаты поиска

Содержание SBUQHS/QHB

Отзывы:

Похожие инструкции для SBUQHS/QHB

Бренды по названию

Популярные бренды