Enterasys Matrix DFE-Gold 4G4202-60, Руководство по установке оборудования

Страница: 25 / 78

Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-5
Connectivity
4G4202-60
The 4G4202 ‐ 60 has 10BASE ‐ T/100BASE ‐ TX/1000BASE ‐ T compliant ports via 60, fixed RJ45
front panel connectors.
4G4282-41
Depending on how the 4G4282 ‐ 41 ( Figure 1 ‐ 1 ) is configured, it can support up to:
• 40, 10BASE ‐ T/100BASE ‐ TX/1000BASE ‐ T switched ports connected through 40, fixed
RJ45 front panel connectors, or
• 40, 10BASE ‐ T/100BASE ‐ TX/1000BASE ‐ T switched ports and an optional network
expansion module.
Management
Management of the module can be either in ‐ band or out ‐ of ‐ band. In ‐ band remote
management is possible using Telnet, Enterasys Networks’ NetSight
®
management
application, or WebView™ application. Out ‐ of ‐ band management is provided through
the RJ45 COM (Communication) port on the front panel using a VT100 terminal or a
VT100 terminal emulator.
Switch Configuration Using WebView
Enterasys Networks’ HTTP ‐ based Web management application (WebView) is an
intuitive web tool for simple management tasks.
Switch Configuration Using CLI Commands
The CLI commands enable you to perform more complete switch configuration
management tasks.
For CLI command set information and how to configure the module, refer to the Enterasys
Matrix DFE ‐ Gold Series Configuration Guide .