Enterasys Matrix 7GR4202-30, Руководство по установке оборудования

Страница: 80 / 86

Memory Locations and Replacement Procedures
B-6 Mode Switch Settings and Installing Options
Figure B-8 Removing the Existing DRAM SIMM
Installing the DRAM SIMM
To install a DRAM SIMM, refer to Figure B ‐ 9 and proceed as follows:
1. Push the connector arms away from the DRAM SIMM enough to insert the DRAM SIMM into
the connector contacts.
2. Insert the DRAM SIMM straight down between the connector contacts enough for the tabs on
the connector arms to align with the two DRAM SIMM alignment notches.
3. Push the DRAM SIMM down into the connector contacts. Then rotate the two connector arms
toward the DRAM SIMM to lock it into place.
1 Connector arms 2 DRAM SIMM 3 Connector contacts
Â
Á
À
À
Caution: Observe all antistatic precautions when handling sensitive electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de
seguridad para evitar descargas de electricidad estática.