Enterasys IRM2 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 88

background image

The IRM2 Chassis View

2-22

Managing the Hub

Three informational fields appear in the upper portion of the window:

Description

Displays the interface description for the currently selected interface: Ethernet.

Address

Displays the MAC (physical) address of the selected interface.

Type

Displays the interface type of the selected port: ethernet-csmacd.

The lower portion of the window provides the following transmit and receive
statistics; note that the first four statistics are also graphically displayed in the pie
charts.

Unicast

Displays the number of packets transmitted to or received from this interface that
had a single, unique destination address. These statistics are displayed in the pie
chart, color-coded green.

Non-Unicast

Displays the number of packets transmitted to or received from this interface that
had a destination address that is recognized by more than one device on the
network segment. The multicast field includes a count of broadcast packets —
those that are recognized by all devices on a segment. These statistics are
displayed in the pie chart, color-coded dark blue.

Discarded

Displays the number of packets which were discarded even though they
contained no errors that would prevent transmission. Good packets are typically
discarded to free up buffer space when the network becomes very busy; if this is
occurring routinely, it usually means that network traffic is overwhelming the
device. To solve this problem, you may need to re-configure your bridging
parameters, or perhaps re-configure your network to add additional bridges or
switches.

These statistics are displayed in the pie chart, color-coded magenta.

Error

Displays the number of packets received or transmitted that contained errors.
These statistics are displayed in the pie chart, color-coded red.

TIP

You can also access this information via the I/F Statistics option available on the
individual port menus; see Chapter 3 Statistics, for more information.

«
...
38
39
40
41
42
...
»

Содержание IRM2

























































































Отзывы:

Нет отзывов

Похожие инструкции для IRM2

Бренд: EAW Страницы: 36

Бренд: M-Audio Страницы: 4

Бренд: M-Audio Страницы: 4

DRUM AND BASS RIG

Бренд: M-Audio Страницы: 3

Бренд: Adobe Страницы: 822

Multimaximizer L3-16

Бренд: Waves Страницы: 23

Бренд: Model Technology Страницы: 37

Бренд: Aastra Страницы: 46

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 4

Бренд: Samsung Страницы: 5

Бренд: Samsung Страницы: 7

Бренд: Samsung Страницы: 7

Бренд: Samsung Страницы: 8

SyncMaster T23A750

Бренд: Samsung Страницы: 46

Бренд: Samsung Страницы: 85

SyncMaster C27A750X

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 113

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды