ENSONIQ Corporation
SPM-1 Musician’s Manual
Page 6
CHOOSING A SOUND
When first switched on, the SPM-1 automatically chooses the first sound in Bank A - Piano 1. Whenever the SPM-1
makes a choice for you, this is known as the DEFAULT.
THE SOUND AND BANK BUTTONS
The SPM-1 features 10 whole keyboard sounds and 2 bass sounds. All the waveforms that these sounds are based
on are permanently carried in ROM (read only memory) chips in the SPM-1. The sounds are instantly accessible
through the Sound and Bank buttons on the front panel.
Selecting a sound is a matter of choosing either Bank A or Bank B and then pressing the appropriate Sound button.
The names of the Bank A sounds are listed above the 5 Sound buttons and the names of the Bank B sounds are
listed below the 5 Sound buttons.
Changing the sound ls quite simple. First decide which sound you wish to change to. The sounds listed above the
Sound buttons are the Bank A sounds. The sounds listed below the Sound buttons are the Bank B sounds.
Then:
1.
Select the proper Bank button. When changing banks, note that pressing a different Bank button will change
the sound instantly to the one listed for bank chosen.
2.
Select the desired Sound button. Steps 1 and 2 are interchangeable. You will not harm the SPM-1 by choosing a
Sound button before choosing the Bank button. In a short time, you’ll develop your own preferred way of
choosing different sounds.
Содержание SPM-1
Страница 4: ......
