ENSONIQ ESQ-M, Руководство музыканта

Страница: 73 / 118

ESQ-M – Musician's Manual
[ENV 1 ] ENVEL OPE PA GE
[ENV 2]
[ENV 3]
[ENV 4]
Controls the parameters of the four Envelopes.
The format of the Envelope Page is the same for ENV 1, ENV 2, ENV 3 and ENV 4,
although each Page is independent. The Envelopes are used as Modulators, and may be applied
wherever a Modulation Source is selected.
All Envelope parameters are expressed in terms of TIME
and
LEVEL. It is important to note that
the Time components of the Envelopes (TIME 1, TIME 2, TIME 3, and TIME 4) each define a
fixed
Time ,
not a
Rate.
Thus, if you raise the value of LEVEL 1 but leave TIME 1 the same, the
Envelope will still take the same amount of Time to reach the new, higher, LEVEL 1.
Also note that the Level parameters can be positive or negative. This allows
for a wide variety of
Envelope shapes, especially useful for modulating the Filter Frequency, Oscillator pitch, etc.
The Parameters on this Page can be selected by pressing Scroll until the desired parameter is showing
or
by entering the Parameter Number immediately selecting the Page.
ENV (1-4) PAGE
Parameters
on this
Page:
0 1 2 3 4 5 6 7 8
LEVEL 1 LEVEL 2
LEVEL 3 VEL LVL VEL T1 TIME 1 TIME 2 TIME 3 TIME 4 KBD9SCAL
0. LEVEL 1
This is the LEVEL that the Envelope will reach at the end of the Time defined by TIME 1.
All Envelopes start at a level of Zero and proceed toward LEVEL 1 when a key is pressed.
Range:
-63 To +63.
1. LEVEL 2
The LEVEL that the Envelope will reach at the end of TIME 2.
Range:
-63 To +63.
2. LEVEL 3
The LEVEL that the Envelope will reach at the end of TIME 3. This is the Sustain
Level.The Envelope will remain at this level until the key is released. After the Key is
released, the Envelope will return to Zero.
Range:
-63 To +63.
3. VEL LVL — Velocity Level Control
This parameter makes all three Levels, LEVEL 1, LEVEL 2 and LEVEL 3, respond to
Keyboard Velocity, or how hard you strike the key. When the value of VEL LVL is raised, a
softer keystrike will decrease all three Levels. The greater the value, the more the Levels will
decrease as you play softer. Thus the Levels set by LEVEL 1, LEVEL 2 and LEVEL 3
define the
maximum
Levels, and parameter [VEL LVL]
subtracts
from those Levels.
Range:
0 To 63.