ENSONIQ ESQ-M, Руководство музыканта

Страница: 70 / 118

ESQ-M – Musician's Manual
This could be a rather long, dramatic "slide", or an almost imperceptibly
short one, depending on the
value you assign to TIME 2. How much the Pitch is altered will depend on the value of LEVEL 1
and the Modulation depth.
VELOCITY CONTROL OF ENVELOPES
There are two parameters on the Envelope Page allow you to alter an Envelope depending on
keyboard velocity,
or how hard you strike a key.
[VEL LVL] — Velocity Level control
The first of these, VEL LVL or Velocity Level Control, will
lower
all three levels (LEVEL 1,
LEVEL 2 and LEVEL 3) with a softer keystrike. This means that the settings you assign to
LEVEL 1, LEVEL 2, and LEVEL 3 are
maximum
Levels, the Levels that will be reached with the
hardest keystrike. The amount of VEL LVL determines how much those Levels will be reduced as
you play softer.
With this parameter you can have continuous dynamic control over the three levels by varying how
hard you play. The most common uses of the Velocity Level Control have to do with varying the
volume and brightness of a Program, though in the previous example VEL LVL could be used to
alter the depth of the Pitch Envelope with velocity.