Enraf Nonius 1600905, Руководство пользователя

Страница: 84 / 106

82
1600751-4D
12 Maintenance and Troubleshooting
12.1 User Maintenance
12.1.1 Cleaning of apparatus
To clean the unit, turn it off and unplug the power supply. Clean the unit with a damp cloth. Do
not use abrasive cleaners. A small amount of mild household detergent may be used, if needed.
12.1.2 Cleaning display panel
The display panel contains an anti-reflective coating, which needs special care when cleaned.
Use a soft and dry cotton cloth or micro fiber tissue to clean the panel. To remove fingerprints or
grease, use a non-abrasive glass cleaning agent. Apply a small amount of the cleaning agent to
a soft cotton cloth and than carefully clean the panel.
CAUTION:
•
Do not spray the cleaning agent directly on the glass panel.
•
Do not use cleaning agents that contain strong alkalis, lye, acid, detergents with fluoride
or detergents with ammonia.
•
Avoid touching the glass panel with your bare fingers.
12.1.3 Electrodes and accessories
Between patient uses, the rubber electrodes should be cleaned with lukewarm water. To
disinfect the electrodes or to remove stubborn stains of dirt, use a 70% alcohol solution. The
alcohol solution can cause the black color to be stained, but this does not affect the operation of
the electrodes.
Between patient uses, the sponge pads should be washed in warm water, using a household
cleaner. After washing they must be rinsed with clear water, thoroughly drained and then dried.
Damaged sponge pads should be replaced.
12.1.4 Patient cable
Clean the patient cable with a damp cloth. Use lukewarm water and a non-abrasive household
cleaner. Do not use an alcohol solution. Check the cable regularly for damages and/or bad
electrical contact. We advise, keeping a spare patient cable in stock.
12.1.5 Ultrasound treatment head
To prevent corrosion, clean and dry the contact surface immediately after use. Make sure that
no ultrasound gel remains on the treatment head. We further recommend cleaning the treatment
head and cable daily, using lukewarm water. The treatment head can be disinfected using a
cloth moistened with a 70% alcohol solution. Check the treatment head and cable regularly for
damage.
12.1.6 Cleaning of the StatUS Applicator (Stationary Ultrasound Treatment Head)
General
The StatUS applicator / ultrasound treatment head and the cable must be regularly checked for
damage such as hairline tears which would allow fluid to penetrate.
StatUS applicator / ultrasound treatment head surface
Clean the contact surface of the StatUS applicator / ultrasound treatment head after each use.