background image

12 

 

1600751-4D 

3  Precautionary Instructions 

 
In this section general Warnings and Precautions are listed, that you should be aware of when 
using the 6-series. See also chapter 4 for Warnings and Precautions that are application 
specific. 
 
 

3.1  WARNING: 

 

 Federal law (USA only) restricts this device to sale by, or on the order of, a physician or 

licensed practitioner. This device should be used only under the continued supervision of 
a physician or licensed practitioner. 

 Make certain that the unit is electrically grounded by connecting only to a grounded 

electrical service receptacle conforming to the applicable national and local electrical 
codes.

 

 Do not operate the unit in an environment of short-wave or micro-wave diathermy use as 

this can result in burns beneath the electrodes.

 

 Care must be taken when operating this equipment around other equipment.  Potential 

electromagnetic or other interference could occur to this or to the other equipment. Try to 
minimize this interference by not using other equipment in conjunction with it.

 

 Electronic monitoring equipment (such as ECG monitors and ECG alarms) may not 

operate properly when electrical stimulation is being utilized. 

 This equipment is not suitable for use in the presence of flammable anesthetics mixture 

with air, oxygen, or nitrous oxide.

 

 This device should be kept out of the reach of children.

 

 Keep portable radios and mobile phones at a distance of at least 1 meter from the device 

during ultrasound therapy treatment.

 

 
 

3.2  CAUTION: 

 

 Read, understand and practice the precautionary and operating instructions. Know the 

limitations and hazards associated with using any electrical stimulation device. Observe 
the precautionary and operational decals placed on the unit. 

 Use of controls or adjustments or performance of procedures other than those specified 

herein may result in hazardous exposure to ultrasonic energy. 

 Handle the StatUS applicator / ultrasound treatment head with care. Inappropriate 

handling of the StatUS applicator / ultrasound treatment head may adversely affect its 
characteristics. 

 Inspect the StatUS applicator / ultrasound treatment head for cracks which may allow the 

ingress of conductive fluid before each use. 

 Inspect the StatUS applicator / ultrasound treatment head cables and associated 

connectors before each use. 

 Do not operate the 6-series when connected to any unit other than Enraf-Nonius BV 

devices.

 

 This unit should be operated, transported and stored in temperatures between 10 °C and 

40 °C (50 °F and 104 °F), with a Relative Humidity ranging from 10%-90%.

 

 Do not expose the unit to direct sunlight, heat radiated from a heat radiator, excessive 

amounts of dust, moisture, vibrations and mechanical shocks.

 

 In the case of ingress of liquids, unplug the unit from the mains supply and have it 

checked by an authorized person (see the paragraph on technical maintenance) 

 Before administering any treatment to a patient you should become acquainted with the 

operating procedures for each mode of treatment available, as well as the indications, 

Содержание 1600905











































































































Отзывы: