Enraf Nonius 1498.901 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 72

background image

Page 14 of 72

EN109-1498751-47 IFU

•

Remove the mains cable from the power line connector [1].

•

Place the 4-series device upside down and on a soft surface.

•

Remove the two screws from the battery cover using the supplied screwdriver.

•

Slide and lift the battery cover.

•

Align the battery on the bottom of the main unit with the polarity of battery terminals in the
correct position. The polarity is marked at the bottom of the battery compartment.

•

Locate the black wire and attach it to the

–

terminal of the battery.

•

Locate the red wire and attach it to the + terminal of the battery.

•

Slide the battery upside down into the battery compartment taking care that the wires do not get
jammed.

•

Place and slide the battery cover back into position.

•

Secure the battery cover with the two screws using the supplied screwdriver.

•

Place the device back on its feet.

•

Reconnect the mains cable to the power line connector [1].

Operation from battery

•

Leave power line switch [1] in the Off position (0) and turn on the device on using push button [4].

•

Power LED indicator is lit orange, indicating that the device is operating from the battery.

•

The charge status of the battery is indicated in the right hand top corner of the display.

•

When you have finished the treatments, turn off the device using push button [4].

With the power line switch [1] to On (1), the battery is automatically charged, independent of the state
of the on/off push button [4]. We recommend to use the apparatus from the powerline whenever
possible. This will increase the service life of the battery.

Disconnection of mains supply

Systems without a battery

•

When you have finished treatment, turn the device off by setting the power line switch [1] to Off
(0). The device is now disconnected from the mains supply.

Systems with a battery

•

Turn off the device with push button [4].

•

Power indicator LED [5] is still lit green, indicating that the device is still connected to the mains
supply and that the battery is being charged.

•

Set power line switch [1] Off (0) to stop charging and to disconnect the unit from the mains
supply.

«
...
12
13
14
15
16
...
»

Содержание 1498.901









































































Отзывы:

Нет отзывов

Похожие инструкции для 1498.901

Бренд: Falcon Страницы: 52

Бренд: GE Страницы: 802

Бренд: iET Страницы: 17

Бренд: made for movement Страницы: 51

Бренд: Tascam Страницы: 128

Бренд: ParaBody Страницы: 6

Бренд: Federal Signal Corporation Страницы: 2

Бренд: Harman Kardon Страницы: 7

Бренд: OHAUS Страницы: 84

Бренд: U-Line Страницы: 9

Green Machine H-3518

Бренд: U-Line Страницы: 3

Бренд: ubicquia Страницы: 36

Littmann Classic II Pediatric

Бренд: 3M Страницы: 53

Бренд: Qtx Страницы: 6

Бренд: PI Страницы: 65

Бренд: CAB Страницы: 30

LUNAQUA Classic LED

Бренд: Oase Страницы: 16

Бренд: Vibration Research Corporation Страницы: 333

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды