Enraf Nonius 1403773, Руководство по обслуживанию

Страница: 15 / 60

Enraf-Nonius B.V. Curapuls 670 Service Manual 1403773
Test equipment and tools June 1997 3-1
3 TEST EQUIPMENT AND TOOLS
3.1 TEST EQUIPMENT
For the repair and maintenance procedures of the Curapuls 670 the following test
equipment and accessories are required:
- Digital multimeter 3 1/2 digit, accuracy better than 1 %. (2x) For example Fluke 77
- Two beam oscilloscope, >30MHz, accuracy better than 5%. For example Philips PM
3055
- Safety tester according IEC 601-1. For example a Biotek 601 PRO safety tester
- Universal frequency counter 30 MHz. For example Thandar TF 200
3.2 TOOLS AND MATERIALS
It is assumed that a complete set of precision engineering tools is available. For the
service of the Curapuls 670 the following additional tools are required:
- Anti-static bench mat with earthing wire and wrist strap
- Tool for removal of Dual In Line (DIL) integrated circuits, 0.6"
- Dummy load 50
6
(2x for burn-in test) Par. No. 0403.801
- Curapuls 403/670 HF power meter Part No. 0403.803
- Coax cable length 0.60 m. 50
6
- Coax cable length 1.50 m. 50
6
(2x for burn-in test)
- Miniature screw driver (trim screwdriver), blade 1.4mm.