UM.02 ENOLINE WINE CARD
Page 4 of 46
Rev 08, May 2010
1 .
Introduction
This Op e r a t in g M a n u a l is a n in t e gr a l pa r t of t h e
En om a t ic
W in e
Se r v in g
Sy st e m ,
t h e r e for e
w e
recommend you t o k e e p it a v a ila ble for fu t u r e
references.
Before proceeding to install and operate your Enomatic Wine Serving System,
please read carefully the instructions contained in this Operating Manual. They
provide important information on safety during installation, duty and
maintenance.
The manufacturer will not be liable in any way for any damage that may be
caused by unsuitable or unreasonable use and incorrect interpretation of the
safety rules and installation instructions.
2.
Model Identification
Every Enomatic model is identified with a unique serial number printed on a
Data Label.
There are two Data Labels on the machine: one is on the rear panel, close to
electric socket, the other one is on the frontal side and lays beneath the drop
tray.
The Data Label is the only means of identification authorised by the
manufacturer and it contains all the data needed by the manufacturer to
provide prompt and clear information concerning any technical aspects and to
facilitate the replacement of parts.
AVOID DAMAGE OR REMOVAL OF THE DATA LABEL.
Example:
