USER MANUAL
PTM 215B – BLUETOOTH
®
PUSHBUTTON TRANSMITTER MODULE
© 2019 EnOcean | www.enocean.com
F-710-017, V1.0
PTM 215B User Manual | v1.9 | June 2019 | Page 55/85
Product label
Customer products integrating PTM 215B modules should include a QR code on their prod-
uct label for the purpose of commissioning as described in chapter 5.2. This QR code can
then be scanned by commissioning tools to automatically extract the required product pa-
rameters.
The format of the QR code has to be according to the ANSI/MH10.8.2-2013 industry stand-
ard using the syntax described in chapter 8.2.1. The QR code should at a minimum contain
the two fields listed in Table 7 below.
Identifier Length of data (excluding identifier) Value
30S
12 characters
Static Source Address (hex)
Z
32 characters
Security Key (hex)
Table 7 – Required fields for the product QR code
7.3.1
Example for a product QR code
For this example we consider a product using the following parameters:
Static Source Address:
E21501500100
Security Key:
0123456789ABCDEF0123456789ABCDEF
The resulting ANSI/MH10.8.2-2013 string would be:
30SE2150Z0123456789ABCDEF0123456789ABCDEF
Figure 38 below shows the QR code corresponding to this example. This QR code should be
part of the customer product label with a size and resolution that enables easy scanning
using a mobile phone or tablet.
Figure 38 – Example for a product QR code
