USER MANUAL
PTM 215B – BLUETOOTH
®
PUSHBUTTON TRANSMITTER MODULE
© 2019 EnOcean | www.enocean.com
F-710-017, V1.0
PTM 215B User Manual | v1.9 | June 2019 | Page 57/85
The device label additionally contains two DMC codes:
The smaller DLC on the left side (Manufacturer DMC) is used for manufacturing only
and not relevant for customers
The larger DMC code on the right side (Commissioning DMC) specifies Source Ad-
dress and Security Key and can be used for commissioning the switch into a net-
work.
The structure of the Commissioning DMC is described in the next chapter.
8.1.1
Commissioning DMC structure
The commissioning DMC uses the ECC200 standard to encode the following data string:
<PRODUCT_NAME>ID<SOURCE_ID>OOB<DEVICE_KEY>
This data string identifies the following product parameters:
Product name (always “
PTM215B
”)
48 bit Static Source Address (unique for each device, starts with “
E215
” Prefix)
128 bit device-unique random security key (different for each device)
Figure 40 below shows the Commissioning DMC from the label in Figure 39.
Figure 40 – Commissioning DMC (for PTM 215B versions up to DB-05)
The Commissioning DMC shown above encodes the following string:
PTM215BIDE21501500100OOB0123456789ABCDEF0123456789ABCDEF
For better readability, the same reading is shown below coloured red, green and orange to
identify the different parts:
PTM215B
ID
E21501500100
OOB
0123456789ABCDEF0123456789ABCDEF
This particular DMC reading would identify the following parameters:
Product name =
PTM215B
Static Source Address =
E21501500100
Device-unique random security key =
0123456789ABCDEF0123456789ABCDEF