Enlightened Audio Designs TheaterMaster, Руководство пользователя

Страница: 51 / 56

IX. IR Learning Remotes
A. The SRC-2000 Smart Remote Control:
TheaterMasters are now being shipped with a unique combination back-lit, touch-
screen/push-button learning remote. It is called the
S mart R emote C ontrol
due to its ability to
recall the factory programming, should this ever be necessary. Individual keys can be repro-
grammed, without losing the ability to restore an entire device at will. Due to the use of
user-overridable automatic sequencing, even the learning process is enhanced over normal
types of learning remote. This new remote is described fully in an addendum to this manual.
B. TheaterMaster IR Learning mode:
Intended for use with remote control systems other than the SRC-2000, the TheaterMaster
can itself generate a wide variety of IR control codes for controlling its various functions.
These codes are grouped into three categories:
TheaterMaster , TheaterMaster Setup , and Spe-
cial . Custom installers will find a lot of useful discrete ON and OFF codes in the Specials
group.
To access the TheaterMaster’s list of built-in IR codes, follow these steps:
1. Switch OFF the TheaterMaster’s AC power switch on the rear panel.
2. Switch ON the AC power switch,
and then press the TheaterMaster’s front-panel Power/Mute
button within 1 second (before the VFD turns ou). This will put the TheaterMaster into the
special IR learning mode. In this mode, it will transmit a continuous sequence of IR com-
mands that can be taught to various IR remote control systems.
3. Align the learn window of the IR remote that will be receiving the commands with the
IR window on the Theater-Master front panel. The directions of maximum intensity are
at ±45° from the front panel, not perpendicular to the panel.
4. The TheaterMaster’s front-panel VFD will display the name of the particular key on the
remote that is to be programmed. Press the corresponding key on the remote control.
5. Proceed to the next key by pressing TheaterMaster’s front-panel Power/Mute switch.
The front-panel VFD will now display the name of the next key on the remote that is to
be programmed. Press the corresponding key on the remote control.
6. You may access the previous IR code by double-clicking the TheaterMaster’s front panel
button. The codes are arranged in a circular list, with the Specials appearing last.
7. Switch OFF the TheaterMaster’s AC power switch to exit the special IR remote control
programming mode.
C. Verification of IR programming:
To verify that the IR codes have been properly programmed, access the Theater-
Master’s Remote Control Test Screen by repeatedly pressing
DISP
▼
on page 4 of
the remote’s
TheaterMaster
device (see figure, page 17). Once this screen is dis-
played, you can verify operataion by pressing remote control keys. If the key is
properly programmed, then the name of that key will appear steadily (without any
delay or hesitation) on the TheaterMaster’s VFD.* If there is no response, or if the
wrong name appears, this indicates that this key needs to be reprogrammed.
*The exceptions to this rule are the exit
➞
o
key and the DISP
▲ ▲
key. These keys, if they
are functioning properly, will respectively take you back to the Main Screen, or scroll you
up to the Analog Input Designators screen (see Figure, page 17). In the latter case, you
can return to the Remote Control Test Screen by pressing
DISP
▼
again.
51