Enlightened Audio Designs TheaterMaster, Руководство пользователя

Страница: 41 / 56

Matrix modes, as is CinEQ. However, when either of these features are active, HDCD
decoding is disabled and the Main Screen HDCD indicator will not highlight.
F. Controlling VFD brightness:
The brightness of the front-panel vacuum fluorescent display can be toggled between 100%
and 25% by pressing
↵ ↵
- DISP
▲
or
↵ ↵
- DISP
▼
, on page 4 of the remote’s
TheaterMaster
device.
G. Twelve-Volt Trigger:
Some video screens can be raised or lowered, and some amplifiers turned on and off,
remotely using a 12-volt control signal. TheaterMaster has a switched 12-Volt screen con-
trol output for this purpose. To use this feature, connect your video screen remote control
line to the jack labeled “Screen” on the TheaterMaster rear panel. To toggle the 12-volt
trigger on or off, press the octagonal icon with the double-ended arrow, on page 1 of the
remote control’s
TheaterMaster device. [The status of this output (screen
▲
= off, or
screen
▼
= on) is displayed in the Feature Selection Screen.]
H. Taping a source:
Digital recording of digital sources:
To facilitate digital recording of a digital source, TheaterMaster is equipped with a digital
tape/monitor output. This digital “Tape/Mon” output can be used to tape a source which
can be different from the main, selected program material.
Connect your digital recording device’s (i.e., DAT player or recordable CD) digital input to
the TheaterMaster’s digital Tape/Mon output. Select any desired digital input for recording
by pressing
Tape/Mon - Inp 1, Inp 2, Inp 3, Inp 4, Inp 5 or Inp 6 on page 4 of the remote’s
Setup 1 device. ( Caution. See Chapter III: “E. Programming a tape/monitor lock-out”.)
Pressing TAPE again at any time will cause the currently-selected Tape/Mon input to flash up
on the Main Screen.
Analog recording of analog sources
(Encore and Ovation):
To make analog recordings of analog sources, connect the source’s analog audio outputs
directly to the recording device (analog tape deck or VCR). The Encore and Ovation do not
provide separate Tape/Mon switching for analog sources.
Analog recording of analog sources
(Signature):
To facilitate recording of an analog source, TheaterMaster
Signature
is equipped with analog
tape/monitor outputs. These analog “Tape/Mon” outputs can be used to tape a source which
can be different from the main, selected program material.
Connect your analog recording device’s (i.e., tape deck or VCR) analog inputs to the The-
aterMaster’s analog Tape/Mon outputs. Select any desired analog input for taping by press-
ing
Tape/Mon - Analog - Inp 1, Inp 2, Inp 3, Inp 4, Inp 5
or
Inp 6
on page 4 of the
remote’s Setup 1 device. ( Caution. See Chapter III: “E. Programming a tape/monitor lock-
out”.)
41