Enlightened Audio Designs TheaterMaster, Руководство пользователя

Страница: 18 / 56

B. Phantom mode:
For systems without a front center (CTR) speaker, TheaterMaster provides a “Phantom”
mode, which re-directs center channel information to the LF and RF speakers.* To invoke
Phantom mode, simply disable the CTR speaker (similar to disabling the subwoofer, above)
by pressing
CTR followed by CH- while in the Speaker Adjustment Screen (go to page 2 of
the remote control’s Setup-1 device and press
Adjust
. Exit by pressing the
➞
o
button on the
remote control when done).
*Although the Phantom and 3Stereo modes were originally intended to be used in “starter” systems having fewer
than the normal number of loudspeakers, in high-end systems these modes are sometimes used to remedy a particular
source problem or a particular listening requirement (e.g., listening to Dolby Surround-encoded music, which often
sounds better in Phantom mode).
C. 3Stereo mode:
For systems without rear surround (LS and RS) speakers, TheaterMaster provides a
“3Stereo” mode, which re-directs surround-sound information to the LF and RF speakers.
To invoke 3Stereo mode, simply disable the surround speakers (similar to disabling the
subwoofer, above) by pressing
LS (or RS ) followed by CH- in the Speaker Adjustment
Screen (go to page 2 of the Setup-1 device on the remote control and press Adjust . Exit by
pressing
➞
o
on the remote control when done).
D. Activating balanced outputs (Ovation and
Signature
only):
It is recommended to use the TheaterMaster’s balanced LF and RF stereo outputs in systems
with power amplifiers equipped with balanced inputs. If balanced outputs are used, it is
important to activate Balanced mode on the TheaterMaster.* This is accomplished by pressing
Bal Y/N
on page 1 of the remote control’s
Setup-2
device, which momentarily brings up the
System Configuration Screen, shown below. In this screen, Balanced mode can be toggled
on and off by further pressings of the
Bal Y/N button, while in this screen.
*Balanced mode activates the TheaterMaster’s balanced outputs. It also ensures that when switching back and forth
between stereo and multi-channel playback modes, there is no sudden change in volume.
18
Balanced Mode
Indicator
Crossover
Frequency
Internal
Temperature
Dedicated DTS
Input
}
}
Programmed Tape/Mon
Lock-outs
System Configuration Screen
{