Enlightened Audio Designs TheaterMaster, Руководство пользователя

Страница: 30 / 56

Save Your Setup:
D. Saving your setup:
Now that your TheaterMaster is properly configured for your system and balanced for your
home-theater environment, save these settings by pressing
STO - Mem 1
on the remote
control.
This must be done before disconnecting TheaterMaster from AC power or shutting
off the rear-panel AC power switch, or you will lose your settings!
These saved settings can be recalled at any time by pressing
RCL - Mem 1
. They can also be
updated (i.e., over-written) at any time by pressing STO - Mem 1 again.*
In fact, up to 10 different settings can be stored by pressing STO - Mem 1, Mem 2, Mem 3,
Mem 4, Mem 5, Mem 6, Mem 7, Mem 8, Mem 9 (and with some remotes, also Mem 0 ) .
Any of these setups can be recalled at any time by pressing RCL - Mem 1, Mem 2, Mem 3,
Mem 4, Mem 5, Mem 6, Mem 7, Mem 8, Mem 9 (and with some remotes, also Mem 0 ) .
(See Chapter VIII: “Customizing Your System: Storing Multiple Setups”.)*
*What gets stored separately in each storage location is speaker volume levels (including master volume), speaker
configuration, and bass configuration (including crossover frequency). Memory no. 1 is the default memory on cold
AC power-up,
so be sure that the master volume in memory no. 1 is set to a comfortable listening level.
30