
4. Press and hold Cappuccino button and press On/off switch to the position ‘ I ‘ to turn on the
appliance till the two indicators of Cappuccino blink slowly 5 times to restore the default setting.
The prefer setting of Cappuccino is erased.
Latte
1. Press
Latte
button one time firstly (Press twice for making 2-cup latte manual setting) and only
the one indicator lights on. Then quickly press and hold
Latte
button again about 5 seconds and
the indicator keep illuminating and the appliance goes into the manual setting mode. Continue
to press and hold the button and watch the frothing milk output till it does meet the individual
prefer.
Notes:
the water pump starts to work under the manual setting mode and a little voice due to
pump vibration comes up normally.
2. Release the button and leave the appliance continue to brew latte and finish it automatically.
All the indicators illuminate with no flashing. The prefer setting succeeds and it is programmed
and fixed successfully on the appliance.
3. The appliance will do the same frothing milk output in the following runs.
Notes:
a. The appliance will keep the same individual setting except it is operated to erase the prefer
setting to the default setting.
b. The prefer setting will not succeed or fail to be programmed by the appliance if the water
flow during the individual prefer setting does exceed the adjustable range.
c. To repeat the steps above to set up the prefer setting if it is failed.
4. Press and hold Latte button and press On/off switch to the position ‘ I ‘ to turn on the appliance
till the two indicators of Latte blink slowly 5 times to restore the default setting. The prefer
setting of Latte is erased.
CLEANING AND CARE
Notes:
•
Always make sure the appliance is cool down completely before any cleanings.
•
Always pull the plug from electric outlet before cleaning.
•
Never immerse the housing and power plug into water or any other liquid.
•
Do not clean with abrasive cleaning agents or detergents or solvents.
•
Always make sure on/off switch is on ‘O’ position before and after use.
•
Do not clean any part of the appliance in dishwasher.
•
Keep your appliance clean and thoroughly rinsed. Run water through the brewing head and
steam nozzle after each use.
Milk tank:
CAUTIOUS FOR HOT SURFACE!
Allow the appliance cool off completely. Steam nozzle is very hot after
operation. Do not attempt to disassembly when it is hot.
13