EN
33
•
Bullet point/information on steps during operation
Instruction to be carried out
Declaration of Conformity (see “Declaration of Conformity” section):
Products that feature this symbol meet the requirements of the EC direc-
tives.
Protection class II (mains adapter)
Electrical appliances in protection class II are appliances that have dou-
ble and/or reinforced insulation throughout and do not have the option
of connecting a protective conductor. The housing of an electrical appli-
ance in protection class II, with surrounding insulating material, might
either form all of the additional or reinforced insulation, or part of it.
Tested Safety
Products labelled with this symbol meet the requirements of the Ger-
man Product Safety Act. - For AC adapter only
Indoor use
Appliances with this symbol are intended solely for indoor use.
Polarity markings
These symbols indicate the polarity of the connector on appliances with
coaxial power connectors.
Symbol for direct current (DC)
Symbol for alternating current (AC)
S
Switched-mode electrical power supply
A switched-mode power supply converts an unstable input voltage to a
constant output voltage.
Transformer – short circuit-proof
A transformer in which the temperature does not exceed specified limits
if the transformer is overloaded or short-circuited, and which continues
to meet all the requirements specified in the relevant standard once the
overload or short circuit has been rectified.
Dispose of the appliance in compliance with environmental regulations
(see „Disposal“ on page 47).
19400 ML Eurospin IT Content 5006 5664 Final_rev3.indb 33
19400 ML Eurospin IT Content 5006 5664 Final_rev3.indb 33
02.10.2020 09:10:15
02.10.2020 09:10:15
