8
EN
WARRANTY
CORRECT DISPOSAL OF THIS PRODUCT
The appliance is guaranteed for three years from the date of delivery years from the date of
delivery, as shown by the date on the receipt/invoice.
In case of defect existing before purchase, the replacement is guaranteed. The warranty does not
cover those parts found to be faulty as a result of negligence or careless use. The warranty also
excludes all cases of improper use of the appliance or any instances of use of professional type.
The seller refuses to accept any liability for damage that may directly or indirectly be caused
to people, property or pets as a result of failure to abide by all instructions contained in this
manual. The symbol representing the crossed out trash can on the appliance indicates that
the product, at the end of its useful life, must be treated separately from domestic waste.
It must be taken to a recycling centre for electrical and electronic appliances or turned in
to the point of sale when purchasing a new, equivalent, appliance. Correct consignment of the
no-longer used appliance to a recycling centre for treatment and environmentally compatible
elimination avoids negative impact on the environment and public health, and makes possible
the recovery the materials that the product is made from. The user is responsible for taking the
appliance to the recycling centre at the end of its life. For more detailed information regarding
the available collection systems, contract the local refuse centre or the store where the product
was purchased. Anyone who leaves or throws away this appliance without taking it to a collection
centre for electrical-electronic waste, shall be punished by administrative fine as per applicable
law on illegal waste disposal.
Air leaking after vacuum and seal.
•
Wrinkles, crumbs, grease or liquids may cause leaks
along the seal. Reseal or use another bag.
•
Make sure any content in the bag is not with sharp
edge which may lead to bag cracked and damaged.
Seal item with a new bag.
•
Make sure the sealing strip is dry and clean.
•
Check both sealing gaskets are clean and in proper
position.
•
Leaks along the seal can be caused by wrinkles,
debris, crumbs, grease or liquids. Reopen bag, wipe
the top inside of the bag and smooth it out along
the sealing strip before resealing.
It doesn’t seal after vacuuming.
•
Make sure the foam seal gaskets on both the lid and
on the base around the vacuum chamber are clean
and undamaged.
•
Seal properly, the open end of bag should be resting
entirely inside vacuum chamber area.
•
Check sealing strip and the foam gasket beneath
the lid for debris and correct position.
Bag melts.
Sealing strip may be overheat, it is necessary to lift the
lid and allow sealing strip to cool down for 25 minutes
before using again.
