12
ATTENTION:
when you wish to open the tank,
turn off the boiler, plug the appliance out of
the socket, and wait for a few minutes to
allow the product to cool down. Twist the cap
gradually to allow the residual steam out of
the tank, until there is none left.
NOTE:
zips, buttons, studs, etc. may scratch the
sole plate. Even if the sole plate does become
scratched, this does not compromise its func-
tionality.
- Do not wind the cable around the appli-
ance, either before or after use.
- Do not subject the iron to any impacts,
as this could damage it.
- Do not use the steam iron as a heating
unit.
- Always unplug the appliance and allow
it to cool down before filling or emptying
the tank.
- After ironing, use the button provided
to allow all of the steam out and wait for
the sole plate to cool down before put-
ting the ironing apparatus away.
- Carefully check that the tag on the fab-
rics to be ironed/treated matches the
temperature setting on the iron.
DESCRIPTION OF PARTS AND
HOW TO USE
1.
4.
8.
9.
13.
14.
16.
12.
17.
11.
10.
15.
5.
2.
6.
7.
3.
9. Boiler cap
10. Stainless steel sole plate
11. Adjustable thermostat
12. Continuous steam button
13. Steam burst button
14. Cork handle
15. Steam tube connection point
16. Steam iron
17. Sole plate temperature indicator
1. Boiler
2. Light-up button to switch on the iron
3. Light-up button to switch on the boiler
4. Steam-ready green light
5. Insufficient water indicator light
6. Insulated steam tube
7. Power cable
8. Iron rest
When using for the first time, remove the protective film from the sole plate, if present. In the case
of any doubts or malfunction, switch the appliance off and contact the support centre at the
freephone number. When using for the first time, emit bursts of steam repeatedly away from
clothes, then test the iron on a piece of rag cloth to eliminate any manufacturing residues, which
may soil or scratch the fabric being ironed. Allow clothes to dry completely before ironing them. Do
not pass the iron over buttons or zips. To ensure adequate ventilation, there must be a distance of
at least 15 cm between the back and sides of the appliance and the wall or other objects.
Remove any stickers or labels from the sole plate and clean it with a soft cloth, taking care not to
scratch it.
INSTRUCTIONS FOR USE
13
