Engineered Comfort Fan Coil Controller EZstat, Инструкция по установке и эксплуатации

Страница: 19 / 36

Installation and Operation Manual
●
Fan Coil Controller – EZstat
EC-EZstat
Date: 9-2014 Supersedes: NEW
Engineered Comfort reserves the right to change any information concerning product or specification without notice or obligation.
Page 19 of 36
Procedure Steps Display
Starting Display
1. Start at the temperature display.
2. Enter Password 2. The display changes to the MAIN menu display.
F
°
70
AUTO AUTO
Enter
SECURITY
ADMIN LEVEL
0 0 0 0
Select the
SCHEDULE
menu.
1. From the MAIN menu, press either the or button to
select SCHEDULE.
2. Press Enter . The SCHEDULE menu opens.
3. Choose SET CLOCK and then press Enter . The SET Clock menu
opens.
Choose a clock
function to set.
Choose one of the features in the SET CLOCK menu to change the
date, time, or Daylight Saving Time (DST) setting.
• DATE—The current calendar date.
• TIME—Time is set according to a 12‑hour clock.
• UTC OFFSET—Enter the time offset, in minutes, between local
standard time and Universal Time Coordinated. The value of the
property ranges from ‑780 to +780 seconds. The time zones to
the west of the zero degree meridian are positive values; those
to the east are negative values. The value of the UTC Offset
property is subtracted from the UTC received in a UTC Time
Synchronization service request to calculate the correct local
standard time.
• DST ENABLE—Set to TRUE to enable Daylight
• Saving Time and FALSE to use standard time year around.
• DST AUTO—When set to TRUE, the EZstat automatically
calculates the start and end dates from relative dates. For
example, set DST START to the first Sunday in March instead of a
calendar date.
• DST START and DST END—Enter the dates and time to begin
observing DST. If DST AUTO is set to TRUE the dates are relative;
if set to FALSE the date is a calendar date.
6.4 Set the time and date
Setting the time and date requires entering Password 2.
If the EZstat is connected to a BACnet network that includes a time service master, the time and date are automatically
set to the network time and date.
Set the time and date
NOTE