Re : Handsets can answer calls from any port or line, unless port is
dedicated to a specific handset or group.
1. Handset Registration.
a. Press
button on Base 00(default), four LEDs will light up in
setting mode.
b. Handset operation: Press
.
(It will complete the registration process).
c. Repeat, as needed, to add handsets.
2. Establishing additional Base Units:
a. Press
button on new Base.
b. Use Handset 10 or 11 to Add base :
Press
c. Enter 01~07 (base ID).
d. Repeat, as needed, to add base units.
Notes:
1. Only Handset 10, 11 can assign Base ID.
2. Base 00 is a primary base. All handset must register only on Base
00.
3. To avoid interference, the interval between any two bases should
be at least 10 meters (about 30 feet).
1. Plug the transformer end of the Charger AC/DC adaptor into a standard
AC electric power outlet, plug the other end into the DC In jack on the
back of the Charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. The phone system is now ready to perform basic functions such as
making and receiving phone calls and intercom calls. No base station
handset programming is needed for basic operations.
REG
REG
.
MENU 6 1
MENU 8 1
Handset and Charger Installation
10
Select Mode
1.Add Base
10
Added Base
Number: **
CANCEL
29
Getting Started
