19
Handset Features
only
17. Call Transfer(For DuraFon PRO
)
a. Direct Transfer: transfer a telephone call to another handset
without announcement.
b. Announced Transfer: speak to the destination handset before
transferring a telephone call.
18.
Call Forwarding(For DuraFon PRO
)
only
a. Forward all incoming phone calls to another handset.
b. Forward all incoming phone calls to another landline or cellular
phone number.
c. Call forwarding to an outside line, may not be supported by
all PBX or Key systems.
Note:
(1) Once enabled from the handset, all phone calls will be routed to
the designated number until disabled. A warning message will
appear on the LCD.
(2) Intercom calls are not forwarded.
(3) Before setting this feature, please check your PBX system if it can
send a reverse signal to hang up the line.
14. Key Tone
a. Three key-tone volume selections (high/low/off).
b. Four key-tone type selections.
15. Call Timer(For DuraFon PRO
only
)
a. Display call time duration for current call during and immediately
after the call
.
16. Text Messaging
a. Editing Message: from a handset, users can edit the short text
message for up to 50 characters. Up to 5 messages can be edited
and stored.
b. Sending Message: In view mode, handset can send a message to
another handset or a group of handsets.
When view a text message
,
Press
2-WAY Intercom
Key, then enter 2-digit handset ID or Group
ID, the message sent out.
c
. Incoming Message: A distinctive tone alerts an incoming message.
The message will stay on LCD display for 8 seconds and then is
saved in memory. A total of 5 incoming messages can be saved.
