Page 67 of 71 Article no.: 1080621019 2021_12_10 Subject to technical change! Errors excepted.
Incérez le module d'interface sur le côté droit de la platine (voir image 3). Si il a des câbles, passez les à travers les
orifices en bas à droite du boitier aprés avoir enlevé les opercules nécessaires. Refermez le calculateur.
Après installation du module l´ancien scellé doit être impérativement remplacés par un nouveau scellé numéroté
livré avec le module (coller sur l´ancien scellé). L´autocollant avec code barre peut être utilisé pour votre
documentation.
Pour retirer un module, ouvrir le calculateur comme décrit ci-dessus. Tout en ouvrant le calculateur, pressez
méticuleusement l´arrête supérieure du couvercle contre l´arrête supérieur du boitier (partie noire). Ainsi, les deux
fixations à l´arrière du couvercles soulèvent le module de la platine (voir image 4).