ENFORCER SK-1131-SPQ Скачать руководство пользователя

Страница: 30 / 32

ENFORCER Access Control Keypad with Proximity Card Reader

SECO-LARM U.S.A., Inc.

Direct Access to Programming (DAP):

Direct Access to Programming (DAP) is used to reset the master code if it is forgotten. DAP will not

change the programming of the

SK-1131-SPQ

in any other way.

To Use DAP:

Disconnect the keypad’s power.

2.  Wait one minute to ensure that the keypad’s power is fully discharged.
3.  Reconnect the power. The keypad will beep repeatedly for one minute.
4.  While the keypad is beeping, press the egress button once to stop the beeping.
5.

Enter the DAP code:

2828 **

The center green LED will now turn ON, indicating that the keypad is ready for a new master

code to be programmed.

NOTE

•

See “Programming the Master Code” on page 13 for how to program a new master code.

•

Direct Access to Programming (DAP) will not reset the keypad’s programming. It will only enter

programming mode in order to program a new master code.

Содержание SK-1131-SPQ

































Результаты поиска

Содержание SK-1131-SPQ

Отзывы:

Похожие инструкции для SK-1131-SPQ

Бренды по названию

Популярные бренды

ENFORCER SK-1131-SPQ, Руководство пользователя

Результаты поиска

Содержание SK-1131-SPQ

Отзывы:

Похожие инструкции для SK-1131-SPQ

Бренды по названию

Популярные бренды