28
ENFORCER Access Control Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc.
Programming the Egress Delay/Warning/Alarm:
With most keypads, the egress button provides a simple way for someone inside a protected
premises to exit through a locked door by pressing a button instead of using a keypad. However, in
some situations, delaying the egress operation and/or providing some warning or alarm when the
egress button is used is desirable.
For example, in hospitals or schools, it may be desirable to delay the egress operation and provide
a warning to prevent patients or young children from easily leaving the protected area.
For simple egress with no delay, warning, or alarm, do not change this setting. It is disabled by
default.
When programming the egress delay/warning/alarm, use this general formula:
90 a bb #
90
– Program Egress Delay/Warning/Alarm
A
– Egress Mode
BB
– Delay Time
Egress Modes:
There are six possible egress operation configurations for the
SK-1131-SPQ
:
•
1
Momentary contact with no warning or alarm (default) – Press the egress button momentarily
for silent egress operation.
•
2
Momentary contact with warning beep – Press the egress button momentarily. The keypad
will beep for the programmed delay time before letting the door open, to warn that someone is
preparing to exit the protected area.
•
3
Momentary contact with warning beep and alarm – Press the egress button momentarily.
The keypad will beep for the programmed delay time and activate the alarm output before letting
the door open, to warn that someone is preparing to exit the protected area.
•
4
Hold contact with no warning or alarm – Press and hold the egress button for the
programmed delay time until the door is open. This prevents accidental opening of the door.
•
5
Hold contact with warning beep – Press and hold the egress button for the programmed
delay time until the door is open. The keypad will beep during the delay time before letting the
door open, to warn that someone is preparing to exit the protected area.
•
6
Hold contact with warning beep and alarm output – Press and hold the egress button for the
programmed delay time until the door is open. The keypad will beep during the delay time and
activate the alarm output before letting the door open, to warn that someone is preparing to exit
the protected area.
