2
7⁄8
” (73mm)
1
½
”
(38mm)
4
5⁄8
”
(117mm)
6
ENFORCER Access Control Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc.
Overview:
LED Indicators and Keypad Sounds:
Parts List:
1x Keypad
1x Back box
2x Installation screws
2x Mounting screws
1x Diode
1x Manual
Keypad Sounds and LEDs
Status
Sounds
(1)
Green/Red/Amber LED (Center)
In programming mode
–
Steady ON
Successful key entry
1 Beep
1 Flash
Successful code/card entry
2 Beeps
2 Flashes
Unsuccessful code/card entry
5 Beeps
–
Power up delay
Continuous beeping
Continuous flashing
Output relay activation
(2)
1-Sec long beep
–
In standby mode
(3)
–
1 Flash/sec
System refresh mode
2 Beeps
Fast flashing for 2.5 min
Card/code already stored
1 Long beep
–
Real time clock stopped after
power loss
Continuous 3 fast beeps
every 5 seconds
–
NOTE
:
1. Keypad sounds can be programmed ON or OFF (see page 25).
2. Output relay activation sounds can be programmed ON or OFF (see page 25).
3.
Green center LED flashing during standby mode can be programmed ON or OFF
(see page 26).
LED Indicators
Red LED (Left)
Green/Red/Amber LED (Center)
Green LED (Right)
Steady
Available for free connection
Programming mode (green)
Output #1 disabled (red)
Available for free connection
Flashing
–
Standby mode (green)
Inhibit mode paused (red/amber)
Keypad Locked (red/amber)
–
