9
ENFORCER Access Control Keypad
SECO-LARM U.S.A., Inc.
Getting Ready to Program:
Keypad Codes:
There are four types of keypad codes:
•
0DVWHUFRGH±8VHGRQO\IRUHQWHULQJSURJUDPPLQJPRGHWKHUHFDQEHRQO\RQHPDVWHUFRGH
per keypad.
•
Super user code – Can be used to activate the output, or to disable (inhibit) or enable the
operation of the output.
•
8VHUFRGHV±8QLTXHFRGHVIRUHDFKXVHUWRDFWLYDWHWKHRXWSXW
•
9LVLWRUFRGHV±7HPSRUDU\XVHUFRGHVWKDWFDQEHDVVLJQHGWRYLVLWRUVRUWHPSRUDU\ZRUNHUVWR
DFWLYDWHWKHRXWSXWWKHYLVLWRUFRGHVFDQEHSURJUDPPHGIRURQHWLPHXVHRUWRH[SLUHDIWHUDVHW
number of hours has passed.
Power Up the Keypad:
:KHQWKHNH\SDGLV¿UVWSRZHUHGXSLWZLOOEHHSFRQWLQXRXVO\IRUDERXWPLQXWH'XULQJWKLV
SRZHUXSWLPHLIQHHGHGXVH'LUHFW$FFHVVWR3URJUDPPLQJ'$3WRUHVHWWKHPDVWHUFRGHVHH
³'LUHFW$FFHVVWR3URJUDPPLQJ'$3´RQSDJH
1. Turn off the beeping before the 1-minute power-up period ends:
This will immediately stop the beeping.
When the beeping has ended, the keypad is ready for normal operation or for programming.
Enter and Exit Programming Mode:
All programming of the keypad is done in programming mode.
1.
(QWHUSURJUDPPLQJPRGH
[[[[
NOTE:
;;;;
is the master code.
is the default master code
VHH³3URJUDPPLQJWKH0DVWHU&RGH´RQSDJHWRSURJUDPDQHZPDVWHU
FRGH7KHDPEHU/('ZLOOWXUQWRDVWHDG\21WRLQGLFDWHWKDWWKHNH\SDGLVLQ
programming mode.
2.
([LWSURJUDPPLQJPRGH
The
HQWU\FDQEHXVHGWRH[LWSURJUDPPLQJPRGHDWDQ\WLPHZKLOHSURJUDPPLQJ7KH
DPEHU/('ZLOOUHWXUQWRÀDVKLQJLQGLFDWLQJVWDQGE\PRGHXSRQH[LWLQJSURJUDPPLQJPRGH
NOTE: DO NOT DISCONNECT THE KEYPAD FROM POWER WHILE IN PROGRAMMING
MODE
'LVFRQQHFWLQJWKHNH\SDGZKLOHLQSURJUDPPLQJPRGHFRXOGFDXVHDNH\SDG
memory error.
16
ENFORCER Access Control Keypad
SECO-LARM U.S.A., Inc.
Programming the Output Mode and Output Timing:
7KHUHOD\IRUWKHRXWSXWFDQEHSURJUDPPHGWRWULJJHU21DQG2))ZLWKDXVHUFRGHWRJJOH
mode), or to trigger for a programmed length of time of up to nearly 28 hours before automatically
turning OFF. The toggle or timed outputs can be used for locking or unlocking a door or for a
variety of functions that can be controlled with the keypad.
When programming the output mode and time, use this general formula:
$$$$$
±3URJUDP2XWSXW0RGHDQG7LPH
$
±2XWSXW0RGHDQG7LPH
Output Mode and Time:
•
±6WDUWVWRSWRJJOHPRGH,QWKLVFDVHWKHRXWSXWVWDUWVZKHQDXVHUFRGHLVHQWHUHGDQG
stops when a user code is entered.
•
to
– The output triggered by a user code lasts 1 to 99,999 seconds (nearly
28 hours) before automatically turning off (default 5 seconds).
NOTE: While the keypad is in momentary timed output mode, the output can be reset any time
by entering the super user code.
Examples:
,QWKHVHH[DPSOHVDVVXPHWKDWWKHVXSHUXVHUFRGHLV
.
1. In programming mode, set the output to toggle:
2. In programming mode, set the output to 60 seconds:
3.
5HVHWWKHRXWSXWWLPHU
