ENFORCER ENFORCER SA-025EQ, Руководство пользователя

Страница: 9 / 12

ENFORCER Delayed Egress Timer
SECO-LARM U.S.A., Inc 9 SECO-LARM U.S.A., Inc.
33 9
Reset Input (N.C.+):

Connect a N.C. switch between the reset input and the positive terminal.

The reset input is used to reset the SA-025EQ.

The reset input is only necessary in the standard relock mode.
Initiate Input (N.C.+):

Connect a N.C. device (such as the SD-961A-36 Push-to-Exit Bar) between the initiate
input and the positive terminal.

The initiate input is used to activate the SA-025EQ.

To activate, hold down the initiate input for the duration of the nuisance delay timer.
Lock Status Input (N.C.+):

Connect a N.C. magnetic contact (such as the SM-200Q) between the lock status input and
the positive terminal.

The lock status input will detect if the door on which the magnetic contact is mounted is
closed in order to trigger the relock functions.
Power Input (12~24 VAC/VDC):

The SA-025EQ is powered by a 12~24 VAC or VDC power supply.

LED 1 (blue) is on when the SA-025EQ is powered.
Bypass Input (N.C.+):

Connect a N.C. switch between the bypass input and the positive terminal.

The bypass input is used to bypass the SA-025EQ and allow unrestricted entry and exit via
the door.

When the bypass input is activated, the lock will immediately release. It will remain released
until the bypass input is deactivated.

The bypass input will not trigger the remote alarm or local alarm.

If not used then a jumper must be installed between the bypass input and the positive
power input terminal.
Free Egress Input (N.C.+):

Connect a N.C. toggle switch between the free egress input and the positive terminal.

The free egress input allows the lock to be put in the free egress mode. This bypasses any
delays and alarms, allowing the initiate device to act as a simple egress device.

In the free egress mode, the lock is released as soon as the initiate device is triggered.

The door will relock after 5 seconds.

This can be used in conjunction with a timer (such as the SA-027Q annual timer) to allow
free egress during the day, but restricted access at night.

The remote alarm will also signal during free egress if the door is left open longer than
5 seconds (the lock status jumper must be ON for this to occur).

If not used then a jumper must be installed between the free egress input and the positive
power input terminal.