ENFORCER DP-266-1C7Q, Руководство по установке

Страница: 15 / 16

Wireless Video Door Phone
SECO-LARM U.S.A., Inc. 15
Tamper Alarm
The tamper alarm activates anytime the camera is removed from the bracket, warning the user of
possible vandalism. The tamper alarm will sound on the camera and any connected monitors.
1. To disable the tamper alarm if no monitors are paired with the camera:
a.
Return the camera to the bracket.
b. If the alarm persists, unplug the camera and remove the battery.
c. Return the camera's battery and reconnect it to power.
2. To disable the tamper alarm if one or more monitors are paired with the camera:
a.
Repeatedly press the "OK" button on all paired monitors.
b. If the alarm persists, unplug the camera and remove the battery.
c. Unplug each monitor and remove each monitor's battery.
d. Return the camera's battery and reconnect it to power.
e. Insert each monitor's battery and reconnect each monitor to power.
3. To permanently disable the tamper alarm, see Alarm Setting in Programming the Advanced
Settings , pg. 11.
Troubleshooting
The monitor's screen is
blank

Make sure the "ON/OFF" or "OK" button was pressed to wake the monitor

Make sure the monitor's battery is charged

Plug the charger directly into the monitor
The monitor is not
charging

Remove the battery from the battery compartment and clean both the
battery contacts and the monitor's connection contacts

Make sure the kickstand is extended when placing in the charger stand

Make sure the power adapter is correctly connected to the charger stand

Connect the power adapter directly to the monitor
The monitor does not ring

Check that the volume is turned up

Check that the monitor is in standby mode

Check that the monitor is placed in the mounting bracket
The monitor cannot
connect to the camera

Check that the monitor has been paired with the camera

Check that the monitor is within range of the camera
The monitor's screen
image quality is poor

Adjust the monitor's display brightness

Clean the camera's lens using a soft, clean cloth

Change the position of the camera

Move the monitor away from potential sources of interference
(microwaves, television, lamps, etc.)
The monitor is unable to
activate the camera's relay

Make sure the user is pressing the "Menu/Unlock" button when in two-
way communication (the microphone icon is lit and does not have an "X"
through it)

Check the wiring between the camera and the optional door locking
device