Enerzone Euromax, Инструкция по установке и эксплуатации

Страница: 96 / 100

96
Euromax Pellet Stove Installation and Operation Manual
To complete the installation, make a hole of1/4" to 1/2" (6 mm à 13 mm) bigger than the
insulate pipe diameter in the outside wall of the house at the chosen location. From outside,
place the outside air inlet cap (E) in the hole (open side down) and fasten the register to the
wall, with screw. Place the insulated pipe (A) over the register tube and over the fireplace
outside air connector (D). At each end, carefully pull back the insulation and plastic cover,
exposing the flexible pipe. Attach the flexible pipe using pipe clamps(C). For a better seal, you
may also use aluminum tape. Wrap the tape around the joint between the flexible pipe and
the air inlets. Carefully push the insulation and plastic cover back over the pipe. Fix the plastic
in place using aluminum tape.
A rodent guard (minimum 1/4” wire mesh) must be used at the termination. All connections
must be secured and airtight by either using the appropriately sized hose clamp and/or UL-
181-AP foil tape.
Make sure that the fresh air intake backdraft shutter (A) functions freely. The fresh air intake
backdraft shutter is located in the back of the stove.