5. Install white plastic hinge blocks on shaft ends (Fig. 6.1.5). Note that grooved chamfer is down
and shaft must be inserted into hole closest to damper channel (Fig. 6.1.5).
6. Ensure damper is properly aligned with collector frame and secure hinge blocks (Fig. 6.1.6).
Secure damper channel with long self-drilling screws (Fig. 61.6). Note these screws pass through
outer and inner walls of damper channel, sandwiching collector backing.
7. Secure intake grill with removed screws. Left-to-right conversion is now complete.
Fig. 6.1.5 – Inserting stagnation-control device into hinge blocks
Fig. 6.1.6 – Securing stagnation-control hinge blocks and damper channel.
Solar Collector
Installation Manual
19
Module 4
Содержание EWRA1
Страница 37: ......
