6
backlight (even if night mode is
OFF).
Press this button to return to the
previous page or move upward
through the menu structure.
Press and hold this button for 10
seconds to reset the parameters
when watch is turned off.
2.
OK
Select and go to next step
Browse through the training
screens during a workout
3.
UP/START/STOP
Browse between time screen,
GPS status screen, compass screen
and MENU screen.
Move up into different menus
Pause and restart training.
1
DOWN/SPLIT/
SAVE
Browse between the time screen,
the MENU screen, the compass
screen AND the GPS status screen.
Move down into the different menus.
Split a recording workout into laps.
Save or delete a paused workout.
Install a firmware update dowloaded
from
www.energympro.com
1. Turn OFF the device.
2. Use the clip to connect the watch to your computer.
3. Your OS system (windows, mac, linux, etc.) will recognize the watch as a
new mass storage USB device.
4. Drag and drop the .cpw file into the “DEVICE FIRMWARE UPGRADE”
folder of the device.
5. Eject the watch from your computer and turn your watch ON.
6. The firmware update will be autoexecuted and the device will power OFF
by itself.
NOTE: DO NOT interrupt the updating process and make sure the
battery is fully charged prior updating.
Troubleshooting
