Maple Leaf Mews
Kingston 10
JAMAICA
Step 1.
Take the tail stock track out and
Step
2. Take the reflectors out and connect
put it under the frame. Open the screw
them with front legs by bolts and nuts.
bag, finding the bolts that match the
Attention: the reflector near to the tail
connecting holes to connect the tail
stock track should not be installed now so
stock track with front legs.
as to operate more easily in the installation
of the rear legs and assistant bars.
Fig 3
Fig 4
Step 3.
Find the tank brackets and
Step 4.
Take the rear side legs out and
connect them with rear legs.
Attention:
connect them with the corresponding
The installation of the three tank
connecting holes of the tank brackets by
brackets is the key point; observe
bolts. Observe carefully how the rear side
carefully so as to avoid the faulted
legs are collected with the tank brackets.
installation.
Fig 5
Fig 6
Step 5.
Connect the front legs with rear
Step 6.
Take the cross bars out that are
legs by assistant bars, pay attention to
used to fasten the rear legs, group them
the length order of assistant bars. Take
together first. Connect the cross bars
www.energyplusja.com
Page 16 of 48
