Maple Leaf Mews
Kingston 10
JAMAICA
5.3.2 Installation of the tank:
Fig 1
Fig 2
Fig 3
Step 1. Screw
off the nuts
Step 2.
Install the
Step 3.
Install the T.P
from the connection bolts
accessories
and revolve valve.
of the water tank. Take the
the small red cap of the
water tank out. Put it on
air vent on the top to
the well-installed frames
ventilate.
slowly and lightly.
.
Attention that insert the
bolts of the water tank
into
the
corresponding
connecting holes of the
tank brackets.
5.3.3 Installation of the heat pipe and vacuum tubes
Step 1.
Firstly sheathe the anti-dust circles onto the vacuum tube.
Step 2.
Take the adjustable tail stocks down.
Step 3.
Pull the heat pipe out of the vacuum tube about 20 centimeters.
Step 4.
Sheathe the white Teflon gasket into the heat pipe and put it onto the convex
of the copper circle.
www.energyplusja.com
Page 18 of 48
