[0203072TSS] TSS-D Battery Chargers r1
User's Manual
CHARGE PROCESS
While the charge is in progress, the following parameters are
continuously displayed in sequence:
•
Battery Voltage/cell
(Output voltage)
(U)
(Volt);
•
Charge current
(Output current)
(A)
(Ampere);
•
Capacity charged
(C)
(Ah);
•
Effective time of charge
(h)
(Hours);
The letter after the value (U-A-C-h) indicates which parameter
being is displayed.
To display the time, the charger uses this format:
(HOURS) . (MINUTE DECADES) h
Examples:
Time of charge 3h 30minutes:
Displayed 3.3h
Time of charge 7h 50minutes:
Displayed 7.5h
•
The charge current follows the Wa curve, as described in the norm DIN 41774.
When the battery reaches the gassing voltage, the charge continues for one half of the time
needed to reach the gassing voltage, with a minimum total time of 30 minutes.
__________________________________________________________________________________________________________________________________________________
Page 13/19
