[0203072TSS] TSS-D Battery Chargers r1
User's Manual
EQUALIZE
Chargers have a complete set of programmable equalize & refresh functions:
MANUAL EQUALIZE:
4 hours extension of the charge time (selected by user)
DAILY EQUALIZE:
4 hours extension of the charge time (everyday)
AUTO EQUALIZE & REFRESH: Weekly equalize cycle + long term battery refresh
MANUAL EQUALIZE
The MANUAL EQUALIZE function is intended for the users that prefer to manage the
equalization of the batteries personnally.
It will extend the time of the charge cycle by 4 hours, and it can be enabled by pushing the
apposite button, located on the right side of the front panel, during the first minutes of
charge.
The display will add the message “Eq. On” to the cyclical visualization of the charge
parameters, and the charge will proceed normally.
Once the manual equalize has been selected, the only way to deselect it is to disconnect and
re-connect the battery.
DAILY EQUALIZE
The DAILY EQUALIZE function will extend all the charge cycles by 4 hours, and it's suitable to
recover batteries that are lightly sulphated.
It can be enabled by moving the internal DIPSWITCH #1 to position ON (see the description of
the programmation dipswitches in the previous paragraphs).
The DAILY EQUALIZE function is DISABLED by default.
Since the DAILY EQUALIZE is a very intense equalize program and may tend to overcharge
the battery, it's recommended to limit it to short periods, then to return to a normal equalize
program.
It's also recommended to survey the operation of the charger and keep the temperaure of the
battery under precise control while the DAILY EQUALIZE function is enabled.
__________________________________________________________________________________________________________________________________________________
Page 16/19
ATTENTION!
The proper programmation of the equalize & refresh modes is important
for the correct operation of the chargers.
Only expert users should modify these settings.