9
EG-PMS2
PROGRAMMABLE USB SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
As soon as you turn the
Main rocker switch (Z)
on then the
Power
manager
software or the hardware schedule will be able to turn the
manageable sockets on and off.
To protect the connected devices from possible high current and
short circuit EG-PMS2 is equipped with the automatic circuit breaker.
NOTE:
If the total power consumption (or peak power) of the devices,
connected to EG-PMS2 exceeds 2200 Watts, the circuit breaker may
power EG-PMS2 off. In this case, please, remove the excessive load
first and then (after 2-3 minutes) press the main rocker switch (Z) to
restore the power supply.
3.2.
Power Manager
installation
Insert the
Power Manager
CD into a PC CD-ROM drive.
If for any reason the automatic setup does not work, then open CD-ROM
drive in the
My Computer
window and launch SETUP.EXE from the CD
Follow instructions of the installation software
4. Power Manager software
The
Power Manager
software is designed to support not only EG-
PMS2 but also other energy management products of the EnerGenie
