8
EG-PMS2
PROGRAMMABLE USB SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
3.1. Getting started
Connect EG-PMS2 to the wall socket first and then to the USB
socket of the manageable computer.
EG-PMS2 can now be switched on and off by means of the
Main
rocker switch (Z)
.
Two (the first and the last) sockets of EG-PMS2 are switched on and
off by means of the
Main rocker switch (Z)
and cannot be managed
by the computer – so they are called
non-manageable sockets
in
this manual.
If EG-PMS2 is switched on then the Surge OK indicator is lit. In this
case both non-manageable sockets are now
live
and connected to
the power supply.
The sockets:
Socket 1, Socket 2, Socket 3 and Socket 4
can be
managed or pre-programmed by computer via USB. They are called
manageable sockets
in this manual.
The manageable sockets of EG-PMS2 can be programmed to be on
or off. The current status of each manageable socket is represented
by the corresponding indicator which will be lit if the socket has
power to it.
If the
Main rocker switch (Z)
(see figure #1 above) is turned off then
the manageable sockets cannot be switched on by either
Power
manager
software or the hardware schedule.
