12
EG-PMS
PROGRAMMABLE USB SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
•
The sockets:
Socket 1, Socket 2, Socket 3 and Socket 4
can be
managed or pre-programmed by computer via USB. They are called
manageable sockets
in this manual.
•
The manageable sockets of EG-PMS can be programmed to be on
or off. The current status of each manageable socket is represented
by the corresponding indicator which will be lit if socket has power to
it.
•
If the
Main rocker switch (Z)
(see figure #1 above) is turned off then
the manageable sockets cannot be switched on by either
Power
manager
software or the hardware schedule.
•
As soon as you turn the
Main rocker switch (Z)
on then the
Power
manager
software or the hardware schedule will be able to turn the
manageable sockets on and off.
•
To protect the connected devices from possible high current and
short circuit EG-PMS is equipped with the automatic circuit breaker.
NOTE:
If the total power consumption (or peak power) of the devices,
connected to EG-PMS exceeds 2200 Watts, the circuit breaker may
power EG-PMS off. In this case, please, remove the excessive load first
and then press the
Circuit breaker
button to restore the power supply
(see figure #2 above).
