22
EG-PMS
PROGRAMMABLE USB SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
•
The new event time should be in the future
•
There can not be a duplicate entry
•
The total quantity of events can not exceed 16 per socket
•
The total quantity of events also depends on the total execution
period of the schedule
•
The interval between the present and the last entry can not exceed
180 days
•
Without loop the total execution period of the schedule can not
exceed 215 days
•
Loop period can not exceed 180 days
NOTE:
If the device is powered off the hardware schedule is still in
the device memory and will be resumed when the power supply is
restored. However the whole schedule will be then delayed with the
power cutoff time. EG-PMS will then start beeping indicating the
hardware schedule problem. Press “Silence” button once to turn the
beeps off if you don’t care about the accuracy of your schedule. You
can also adjust the schedule eliminating the delay. Every time you
press the “Silence” button again after the beeps were off, the schedule
will be adjusted with one minute. Alternatively create and upload a new
schedule using the ‘
Timer schedule
’ dialog box.
